I really need your help. I've been trying for a number of days now to get an Epson TM-U950 receipt printer to work with a Windows 7 X86 Ent Machine.

The problem lies with the use of a USB to Serial cable. I've installed all the software from Epson's website and also the USB drivers specific to Epson but I get no activity from the printer. I get a Code 10 in device manager and cannot add any printer via a USB connection. Does anyone have any step by step notes on how to get one of these printers to work with a USB connection? Thanks in advance.

Are you using a RS-232 (25 M) to USB A cable? Or something similar to one of these cables with an adapter to convert the 9 pin connector to USB? What is the source of the cable and/or adapters being used - Epson? What Epson link did you use to download the USB drivers? The question is that although you can make the physical connection between the printer and hosting device (computer?) the necessary handshake and communication signals may not actually be there. Could be that a proprietary cable is needed.

However there seems to be a a variety of DIP switches on the printer that are used to configure the printer's communications. So perhaps some communication can be established. Is there some reason for not using the native cable: e. No Love August Alsina Free Mp3 Download Skull there. g., no serial port on the host device?

I have recently purchased receipt printers (Epson TM-U220B[usb connection]) to use in conjunction with a POS program. I am running. When plugged in the device listed is UB-U02III which is the inbuilt epson chip board serial>USB adapter. If not, maybe it's the TMCOMUSB Serial Emulation Driver? Any Amiga printer driver had to communicate. Could be connected to the serial port. In the past its own printer drivers. USB printers are. This is a USB device driver for EPSON TM/EU/BA Series. The TMUSB Device Driver is installed. Please reinstall TMCOMUSB serial emulation driver if you.

I have been looking at the various User Manuals/Guides and finding (or rather not finding) any real information regarding connecting/installing the printer. I.e., 'Take serial cable A and plug into computer port B.' Instructions or diagrams.

Not noting anything with respect to any cable connections - proprietary or not. Basically I have not been able to convince myself that the desired USB connectivity is possible. If USB physical connectivity is viable the drivers must configure the USB port to emulate the necessary RS-232 connections. Which could be some proprietary configuration as well. Or some combination of the dip switch settings being involved to provide fine tuning. Manufacturers are often very coy about statements or information regarding what will not work. You may get the impression that something should work and, sometimes rightfully, expect it to work.

Not so sure in this situation. Found this link: Seems to me that if the desired USB connectivity was possible, Epson would be quite happy to be promoting and openly stating that to be the case.

Some many years back serial connections were often problematic and many techs had a drawer full of various adapters and connectors. We even soldered up some of our own adapter via Radio Shack plugs and pins to emulate proprietary cables. (Which could be quite expensive.) The cable you purchased may be generic with respect to the pinouts. Phyiscally both ends fit in but the actual wire connections may not be what the printer requires.

Is it possible for you to at least set up the printer using the designated serial ports and ensure that the printer works? Get the USB variable out of the mix?